KK27793Fitment confirmation138-tooth drum drive gear
Replacement 138-tooth cotton picker drive gear matched to KK27793 and predecessor AN272800. Confirm OD, face width, bore, installed location and mating components.
- References
- KK27793 / AN272800
Cotton picker gears and spindle-drive parts
Gears and drive-side components matched by location, tooth geometry, dimensions and reference relationship.
Reference numbers identify the inquiry; they do not replace an installed-part check. Confirm the machine, row unit and part form before ordering.
13products found
Build bulk RFQN118289Fitment confirmationSpindle drive spur gear
Replacement 14-tooth spindle-drive spur gear matched to N118289 for picker-bar service orders. Confirm bore, pin holes, machine and installed location.
- References
- N118289
L2456NFitment confirmationSpindle drive L-gear
Reference information for L2456N: spindle drive l-gear. Listed for a 1/8-inch roll pin. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- L2456N
N278037Fitment confirmation18-spindle drive shaft
Reference information for N278037: 18-spindle drive shaft. 18 spindle positions; PRO-12 documentation context. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N278037
N371720Fitment confirmation18-spindle drive shaft
Reference information for N371720: 18-spindle drive shaft. 18 spindle positions; not asserted interchangeable with N278037. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N371720
N275212Fitment confirmation20-spindle drive shaft
Reference information for N275212: 20-spindle drive shaft. 20 spindle positions; PRO-16 documentation context. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N275212
AN276743Fitment confirmation18-spindle drive shaft assembly
Reference information for AN276743: 18-spindle drive shaft assembly. 18-spindle shaft assembly; PRO-12 documentation context. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- AN276743
JD8804Fitment confirmationSpindle drive needle bearing
Reference information for JD8804: spindle drive needle bearing. Needle bearing; verify installed bearing marking. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- JD8804
N371572Fitment confirmation20-spindle drive shaft
Reference information for N371572: 20-spindle drive shaft. 20 spindle positions; not asserted interchangeable with N275212. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N371572
AN276737Fitment confirmation20-spindle drive shaft assembly
Reference information for AN276737: 20-spindle drive shaft assembly. 20-spindle shaft assembly; PRO-16 documentation context. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- AN276737
N278781Fitment confirmationSpindle drive shaft thrust washer
Reference information for N278781: spindle drive shaft thrust washer. 7760 row-unit guide: spindle drive shaft thrust washer. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N278781
N278782Fitment confirmationSpindle drive shaft sleeve
Reference information for N278782: spindle drive shaft sleeve. 7760 row-unit guide: spindle drive shaft sleeve. This identifies a published John Deere reference, not verified YUCHENG stock, manufacture or fitment.
- References
- N278782
N371626Fitment confirmationBevel gear
Replacement 21-tooth spindle-drive bevel gear matched to N371626. Confirm installed location, bore, tooth geometry, mating gear and retained sample.
- References
- N371626
Frequently checked references
Browse the full directory More gear and drive numbers to check
These records support reference identification only. Send the installed part details before quotation.
AE46875Angle Drive Box Bearing
CheckAKK45882CP770 Upgraded Steel Driveshaft Kit
CheckAL39722Angle Drive Box Bearing
CheckAN273886Lower Drive Box Seal
CheckCE17370Angle Drive Box Seal
CheckDE18209Angle Drive Box Bearing
CheckDE20079Reduction Drive Box Bearing
CheckJD7692Reduction Drive box Bearing (CP690)
CheckJD9321Top Idler Slip Clutch Shaft Bearing
CheckKK12107Spur Gear 20 Tooth
CheckKK1749153 Tooth Adjuster Gear (Steel)
CheckKK20450Spur Gear 25 Tooth
CheckN371626 or N118289: identify the gear first
The catalog separates the N371626 21-tooth bevel gear from the N118289 14-tooth spur gear. Choose by reference and gear form before comparing mounting details.
Bevel gear
Replacement 21-tooth spindle-drive bevel gear matched to N371626. Confirm installed location, bore, tooth geometry, mating gear and retained sample.
N371626 →Spindle drive spur gear
Replacement 14-tooth spindle-drive spur gear matched to N118289 for picker-bar service orders. Confirm bore, pin holes, machine and installed location.
N118289 →List each reference and quantity separately. Match the bore, pin holes, installed location and mating gear to the selected item; tooth count alone does not establish interchangeability.
What to send for drive parts
Machine system, installed location, tooth count, dimensions and reference number.